Automobile

Automobile

Car Restoration

Car restoration is one activity that will leave you with the utmost sense of accomplishment. It is an activity that demands dedication, time and money. Fords and Chevy's are the two models that are the easiest to start with as there are always parts available as the need arises.

Before any car restoration you will need to prepare your shop for the task at hand. Gather the supplies needed such as a camera, a few cardboard boxes, a sharpie and some tags for labels. It is important to keep track of the parts that are taken off now rather than later. When it is time to take the car apart you need to estimate what needs to be replaced and what needs to be repaired. In this way will make sure you are not wasting parts at any time during the car restoration process.

Take inventory of the parts as you remove them by separating them into two individual boxes labeled replace and repair. Take pictures of them as you do this so you know what the car will look like, before and after. This process will also assist you in determining how much money you will need and how long it will take you to complete the project.

After you have all the parts removed you can start the cleaning process. The cleaning process of the car restoration requires the car be stripped down to bare metal. This can be done through several methods although you will need to find one that you feel the most comfortable with. The easiest and fastest way is to have the car dipped in acid. This removes dust, rust, and other foreign materials.

You will be able to view the damage the car has been through once it is stripped. You very well might find rust holes, damaged floorboards, and dents. Do not despair! Even if the car didn't look bad when you bought it you must realize that this car has had a full life life. You want to extend it's life right? So get busy and take that Sharpie to mark all the things that either need replacing or repairing.

Now it's time to fix all those dents, holes, and problem areas to get ready for sanding. You will use several grades of sandpaper during the sanding process beginning with 36 to 80. Once you have finished this step you are now ready to apply the glazing. Begin with 220 wet grit sandpaper and go on to 800 wet grit sandpaper. This will leave your car with a hazy mirror image and also provide a preventative measure against scratches.

Your car restoration is finished! You are now ready to show off your beautiful car to the neighborhood with pride.

For All The Essential Information On Car Restoration go to: Car Restoration (http://www.gifts-for-men.com/carrestoration)



Privacy Policy | Copyright/Trademark Notification